The Ford Barn - View Single Post

1931 flamingo · 01-02-2020, 03:15 PM

Personally with it apart I would scotch brite the flywheel and replace BOTH the p/plate and disc, making sure the p/plate fingers were adj correctly. Also replace the t/out bearing and pilot bearing. JMO
Paul in CT

01-02-2020, 03:15 PM	#17
1931 flamingo Senior Member Join Date: May 2010 Location: new britain,ct 06052 Posts: 9,390	Re: Clutch slipping. Personally with it apart I would scotch brite the flywheel and replace BOTH the p/plate and disc, making sure the p/plate fingers were adj correctly. Also replace the t/out bearing and pilot bearing. JMO Paul in CT