With the trans strapped up I pulled the engine:
LI-20-01-02-019.jpg
LI-20-01-02-000.jpg
Not sure the pressure plate fingers are all the same height (I know it's the other end that counts):
LI-20-01-02-007.jpg
Pretty oily in there:
LI-20-01-02-010.jpg
Pressure plate surface is scored. Can these be resurfaced?
LI-20-01-02-013.jpg
Likewise the flywheel isn't so smooth. I guess this needs resurfacing.
LI-20-01-02-015.jpg
The clutch disc isn't particularly worn, but it is a little greasy.
LI-20-01-02-018.jpg
So what's advisable here?