The Ford Barn - View Single Post

JSeery · 03-19-2020, 05:41 PM

The driveshaft needs to have some angle (not totally straight line) between the output shaft on the transmission and the input shaft on the pinion. And the angles for both need to match as close as possible. Also the u-joints have to be in phase with each other.

03-19-2020, 05:41 PM	#3
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Still vibrating but better The driveshaft needs to have some angle (not totally straight line) between the output shaft on the transmission and the input shaft on the pinion. And the angles for both need to match as close as possible. Also the u-joints have to be in phase with each other.