The Ford Barn - View Single Post

67drake · 01-18-2020, 08:11 PM

Hi
I tried a few sites and someone on the H.A.M.B. Suggested I ask here.
I’m rebuilding my ‘62 260 V8 and am hitting a dead end trying to ID the cam. Stamped on the cam snout is-F 22 B
After the front bearing journal is-FoMoCo UA
After 1st lobe is- 22 15
I can’t find any info that tells me what this cam is. It was suggested I could use my degree wheel and dial indicator to profile the lobes, but the block is at the machine shop. So anyone have an old FoMoCo cam list or idea what cam I have?
Thanks!

01-18-2020, 08:11 PM	#1
67drake Junior Member Join Date: Jan 2020 Location: Muscoda Wisconsin Posts: 10	Trying to ID a FoMoCo camshaft Hi I tried a few sites and someone on the H.A.M.B. Suggested I ask here. I’m rebuilding my ‘62 260 V8 and am hitting a dead end trying to ID the cam. Stamped on the cam snout is-F 22 B After the front bearing journal is-FoMoCo UA After 1st lobe is- 22 15 I can’t find any info that tells me what this cam is. It was suggested I could use my degree wheel and dial indicator to profile the lobes, but the block is at the machine shop. So anyone have an old FoMoCo cam list or idea what cam I have? Thanks!