The Ford Barn - View Single Post

fordwife · 12-13-2019, 01:44 PM

Back in the day we used to screw 2 guide pins which were just bolts with the heads cut off at 3 oclock and 9 oclock into the bell housing to help align the engine to the trans. It made the job easier.

12-13-2019, 01:44 PM	#16
fordwife Senior Member Join Date: Dec 2015 Posts: 287	Re: Pulling engine Back in the day we used to screw 2 guide pins which were just bolts with the heads cut off at 3 oclock and 9 oclock into the bell housing to help align the engine to the trans. It made the job easier.