The Ford Barn - View Single Post

marty in Ohio · 02-20-2019, 04:21 PM

We rebuilt a pump last week with parts from Snyders. In the kit it was explained that the new impeller shaft was 1/4 inch longer to take up the distance in the head from a worn boss. It said to grind the end till the pump fit tight to the head, then put on the gasket and install. Grind slow, check often.
Marty

02-20-2019, 04:21 PM	#8
marty in Ohio Senior Member Join Date: May 2011 Location: Elyria, Ohio Posts: 757	Re: Water pump won't fit now. We rebuilt a pump last week with parts from Snyders. In the kit it was explained that the new impeller shaft was 1/4 inch longer to take up the distance in the head from a worn boss. It said to grind the end till the pump fit tight to the head, then put on the gasket and install. Grind slow, check often. Marty