Quote:
Originally Posted by FrankWest
with ignition switch on
Have 6 volts at switch
6 volts at each coil terminal of brand new ignition coil
6 volts at generator cutoff
Test spark with spark/ coil polarity tester....NOthing lit up.
NO spark through Band new HT wire!!!!!
Looks like nothing is going thru my HT wire????
Could this new coil be bad?????
|
Unfortunately, unlike in the old days, a coil (or any part) being new doesn't necessarily mean it is good. Don't replace too many parts at one time or you may end up looking for multiple problems. I once helped a person start a Model A. It turned out his points were adjusted too wide and didn't close. Did you check the voltage on both sides of the points?
Charlie Stephens