The Ford Barn - View Single Post

JM 35 Sedan · 09-26-2014, 04:50 AM

I like to remove the clevis pins at the rear backing plate (probably what you are calling a face plate) brake lever, and remove the brake rod guide bolts from the wishbones, leaving the guides on the rods. Then carefully tie the brake rods up towards the frame somewhere to get them out of the way. Just my way of doing it.

09-26-2014, 04:50 AM	#10
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Roll back rear to do clutch I like to remove the clevis pins at the rear backing plate (probably what you are calling a face plate) brake lever, and remove the brake rod guide bolts from the wishbones, leaving the guides on the rods. Then carefully tie the brake rods up towards the frame somewhere to get them out of the way. Just my way of doing it. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*