View Single Post
Old 06-30-2019, 03:27 PM   #13
Cool 33
Senior Member
 
Cool 33's Avatar
 
Join Date: May 2010
Location: Forney, Tex.
Posts: 143
Default Re: New Port Engineering

I have their set up in my 33 pickup. They work fine except that I had to get them to swap out the wiper blades for some shorter (8") blades because no matter how I clocked the arm or adjusted the arm length, on the left especially, it either ran the blade out on the side of the windshield frame or the top of it. Now the wiper doesn't run out on the frame but it doesn't wipe right where I look through the windshield. The kit was installed exactly according to instructions. The drive is also very noisy in the cab, even though I insulated the area above the w/sh and made a cover for above the w/sh. I contacted them about this and was told "that is just the way it is". I just felt that for the high cost (in my opinion) that they should run more silently. At least they beat old vacuum wipers.
Cool 33 is offline   Reply With Quote