The Ford Barn - View Single Post

Jon-Ohio · 09-06-2010, 09:05 PM

I agree - the wood around the widow appears to be std stock framing and not for a roll down which is thicker to accomodate the glass channels on the sides and top. Both Mac's and Snyders carries this special thicker bottom , top and side rail framing for a roll down window. The bottom rail is cut with a slot to allow for window movement up and down within the sheet metal drip box and you have to bend the bottom body window "lip" down if I remember correctly.

09-06-2010, 09:05 PM	#16
Jon-Ohio Senior Member Join Date: May 2010 Posts: 191	Re: Roll Down Rear Window Installation I agree - the wood around the widow appears to be std stock framing and not for a roll down which is thicker to accomodate the glass channels on the sides and top. Both Mac's and Snyders carries this special thicker bottom , top and side rail framing for a roll down window. The bottom rail is cut with a slot to allow for window movement up and down within the sheet metal drip box and you have to bend the bottom body window "lip" down if I remember correctly.