The Ford Barn - View Single Post

barnfind08 · 10-03-2013, 10:22 PM

Well it got done and is in the 3W. Kube wins he was first on the Windex idea, that was a big help. I will be taking the car for it's second trial run and this time with a windshield in place. Should be a good barometer on the feel of how it is going down the road. First time out all the wheels were in balance and it stayed straight. I may have to cover the trunk floor with some blankets or such to muffle the dual 36 ford driveshaft exhausts. thanks guys for your help.

10-03-2013, 10:22 PM	#15
barnfind08 Senior Member Join Date: May 2010 Posts: 893	Re: winshield rubber seal install 1934 Well it got done and is in the 3W. Kube wins he was first on the Windex idea, that was a big help. I will be taking the car for it's second trial run and this time with a windshield in place. Should be a good barometer on the feel of how it is going down the road. First time out all the wheels were in balance and it stayed straight. I may have to cover the trunk floor with some blankets or such to muffle the dual 36 ford driveshaft exhausts. thanks guys for your help.