The Ford Barn - View Single Post

JSeery · 01-21-2019, 10:34 AM

The .050 duration numbers are used because it is very difficult to determine the point where lift begins and ends. Using the .050 values are easier to work with when degreeing a cam.

01-21-2019, 10:34 AM	#8
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Isky 3/4 Max 1 Camshaft The .050 duration numbers are used because it is very difficult to determine the point where lift begins and ends. Using the .050 values are easier to work with when degreeing a cam.