The Ford Barn - View Single Post - Engine sits too high for hand crank engagement

Captjohnd · 08-23-2020, 06:15 PM

I have the same problem on my Tudor. The front cross member has been reinforced with a piece of flat bar under the crank guide. I think ford had a problem with the front cross member as I have seen a lot of broken cross members.

08-23-2020, 06:15 PM	#10
Captjohnd Junior Member Join Date: Jan 2019 Posts: 2	Re: Engine sits too high for hand crank engagement I have the same problem on my Tudor. The front cross member has been reinforced with a piece of flat bar under the crank guide. I think ford had a problem with the front cross member as I have seen a lot of broken cross members.