The Ford Barn - View Single Post - 7-tooth steering box rebuild questions

Synchro909 · 02-19-2019, 04:14 PM

Sponsored Links (Register now to hide all advertisements)

First up, I recommend you use the end cap with the tube that goes up the steering shaft to higher than the oil so it can't leak.
I've seen 7 tooth steering boxes where the owner has put a plug in at the full oil level. (Not good for judging) He could then pump the lube in till it came out the new plug hole. It is the same pronciple as we see on the differential houising.

02-19-2019, 04:14 PM	#6
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: 7-tooth steering box rebuild questions Sponsored Links (Register now to hide all advertisements) First up, I recommend you use the end cap with the tube that goes up the steering shaft to higher than the oil so it can't leak. I've seen 7 tooth steering boxes where the owner has put a plug in at the full oil level. (Not good for judging) He could then pump the lube in till it came out the new plug hole. It is the same pronciple as we see on the differential houising. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.