View Single Post
Old 10-20-2019, 08:34 PM   #5
3739ford
Senior Member
 
3739ford's Avatar
 
Join Date: Feb 2017
Location: Dothan, AL
Posts: 325
Default Re: Location of tinfoil to check CR

Thanks Tubman, I may not get the terminology just right, but that is what I need the Fordbarn for. I will use more tinfoil balls as you are right readily available and cheap. The initial results are favorable with head gasket I'm at .045 on three cylinders and .046 on one with using one ball on bottom of piston.
3739ford is offline   Reply With Quote