The Ford Barn - View Single Post

Terry,OH · 01-25-2021, 02:41 PM

The flat piece of metal goes on first with the small bent tab inserted into the rear slot of the ignition switch on/off lever. then the cup with the movable switch contact and finally the cover.

01-25-2021, 02:41 PM	#2
Terry,OH Senior Member Join Date: May 2010 Posts: 4,773	Re: 1935 Ford ignition switch The flat piece of metal goes on first with the small bent tab inserted into the rear slot of the ignition switch on/off lever. then the cup with the movable switch contact and finally the cover.