The Ford Barn - View Single Post

tubman · 09-10-2019, 08:53 AM

I have found that motor mount spacers can be easily made with a couple of chunks of 1/8" wall 2" square tube and a couple of proper sized bolts if you have a hacksaw, drill, and a welder. (The welder is optional). I like them better than the "U-shaped" ones, myself.

09-10-2019, 08:53 AM	#4
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,303	Re: 37 engine in 34 truck I have found that motor mount spacers can be easily made with a couple of chunks of 1/8" wall 2" square tube and a couple of proper sized bolts if you have a hacksaw, drill, and a welder. (The welder is optional). I like them better than the "U-shaped" ones, myself.