The Ford Barn - View Single Post - No reverse BW R-10

whb52ford · 09-25-2019, 07:52 PM

Well I put the snap ring on that holds the ring gear to output shaft.
I bench tested it to see if I had reverse and first gear and i did, so I put the transmission in the car today. Still no reverse. Can't believe it. Exactly the same as last time. Car will move forward, but not reverse, I didn't use the controls to put in reverse, I manually put it in reverse- no change-no reverse. When the car is running and without the clutch it will grind gears when trying to put into reverse. I'm thinking the 3 speed part is good because of the grinding when I put into reverse. I have had it out and now I don't know what to look for. Something in the overdrive part is not right and I just don't get it. Stumped AGAIN

09-25-2019, 07:52 PM	#34
whb52ford Senior Member Join Date: Jan 2013 Location: Ocala, FL 34481 Posts: 235	Re: No reverse BW R-10 Well I put the snap ring on that holds the ring gear to output shaft. I bench tested it to see if I had reverse and first gear and i did, so I put the transmission in the car today. Still no reverse. Can't believe it. Exactly the same as last time. Car will move forward, but not reverse, I didn't use the controls to put in reverse, I manually put it in reverse- no change-no reverse. When the car is running and without the clutch it will grind gears when trying to put into reverse. I'm thinking the 3 speed part is good because of the grinding when I put into reverse. I have had it out and now I don't know what to look for. Something in the overdrive part is not right and I just don't get it. Stumped AGAIN