View Single Post
Old 08-03-2015, 08:36 PM   #8
JeffB2
Senior Member
 
JeffB2's Avatar
 
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
Default Re: Best way to insulate firewall

Quote:
Originally Posted by miker98038 View Post
The other reasonable option is Peel and Seal roofing material, at the Home Depot. A lot of guys over at the HAMB seem to like it. But it's heavier.
X2,I used it in my '54 even on the inner roof as I live in Phoenix it was 110 degrees today hold your hand on the roof and you'll be going to a burn unit inside barely warm. I've done the floors with it too. This is a picture below,and no there is no smell here is the article: http://www.jalopyjournal.com/forum/t...terial.711889/
Attached Images
File Type: jpg '54 Engine & AC 002 (Medium).jpg (68.7 KB, 15 views)
JeffB2 is offline   Reply With Quote