The Ford Barn - View Single Post - Fuel Shut-off Valve Barrel Valve taper

BRENT in 10-uh-C · 06-23-2019, 10:30 AM

Does anyone have the print of the Fuel Shut-Off valve that can give me the correct taper dimension for the Barrel Valve? I am thinking about having a taper reamer made, and then make a few oversized Barrel Valves where an original valve can have the bore enlarged to remove the gouges where an oversized valve can be lapped in. Thanks.

06-23-2019, 10:30 AM	#1
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,521	Fuel Shut-off Valve Barrel Valve taper Does anyone have the print of the Fuel Shut-Off valve that can give me the correct taper dimension for the Barrel Valve? I am thinking about having a taper reamer made, and then make a few oversized Barrel Valves where an original valve can have the bore enlarged to remove the gouges where an oversized valve can be lapped in. Thanks. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .