The Ford Barn - View Single Post

Jacksonlll · 09-19-2018, 08:58 AM

Two things: Get under and take a good look at the clutch actuating arm. Several have failed in our club. It can fool you. The replacement is much stronger. The old one cracks at the shaft.
The other thing is your pilot bearing on the face of the flywheel. I hope you replaced it or at least checked it. Good luck.

09-19-2018, 08:58 AM	#2
Jacksonlll Senior Member Join Date: Jul 2012 Location: Michigan-- Member of Oakleaf of MARC Posts: 1,686	Re: Clutch does’t work. Two things: Get under and take a good look at the clutch actuating arm. Several have failed in our club. It can fool you. The replacement is much stronger. The old one cracks at the shaft. The other thing is your pilot bearing on the face of the flywheel. I hope you replaced it or at least checked it. Good luck.