Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by 36tbird
Yo Richard, is there a stop on the adjustment if you turn it full counter-clockwise? In other words, if you back it all the way out does the adjustment screw come out or does it stop at the "least advanced" spot?
|
There are stops but since the canisters are made in China now, the stops aren't very strong. If you reach a stop and then force it, you'll be buying a new canister soon.
Also, it's often difficult to get the cheap allen wrench go into the adjuster inside the canister. Try rounding that end of the wrench just ever so slightly.
Another also, it's much easier to make adjustments if you put pressure on the wrench to free up the mechanism inside while you turn the wrench.