Quote:
Originally Posted by rotorwrench
If a person had the tool to crimp the special clips that hold a spring unit together, the wire & coil springs are available for a person to make there own but the crimp tooling is not cheep.
|
I strongly considering making my own. I have the old rusty springs to use as a pattern. I found a place to order upholstery coil springs. I saw the price of the Snyders springs and weighed my options. I thought it was a good value to purchase theirs pre-made and correctly done vs. the cost of individual coil springs and my several hours of trial and error to make them.