The Ford Barn - View Single Post - 300 c.i.d. Valve clearance and ignition timing?

dmsfrr · 12-31-2020, 11:25 AM

Probably need to positively ID the engine before you can go too much further with a tuneup.
But I'd only be guessing where to start looking...

There should be a casting number on the block up until the mid 60's, or a metal ID tag after that.
It will help if you can find it.

http://techlib.fordsix.com/fordsix-t...dentification/

.

12-31-2020, 11:25 AM	#4
dmsfrr Senior Member Join Date: Aug 2012 Location: Abq, NM Posts: 3,607	Re: 300 c.i.d. Valve clearance and ignition timing? Probably need to positively ID the engine before you can go too much further with a tuneup. But I'd only be guessing where to start looking... There should be a casting number on the block up until the mid 60's, or a metal ID tag after that. It will help if you can find it. http://techlib.fordsix.com/fordsix-t...dentification/ . Last edited by dmsfrr; 12-31-2020 at 11:43 AM.