The Ford Barn - View Single Post

SteveInMissouri · 04-22-2019, 04:39 PM

Hi All,

I am in the middle of a Merc Montclair power train project. I am finishing off all the pumps and bolt-ons, before dropping it in. I thought I was covered by taking a lot of pictures before I dis-assembled the thing. I guess I missed on taking some pictures of the motor mounts. They are shaped close to the shape of a "C" and I am not sure if the open part of the "C" is pointed to the front of the car or towards the back. They will bolt up either way.

Has someone got any advice that they could help me out with?

Thank You.

04-22-2019, 04:39 PM	#1
SteveInMissouri Junior Member Join Date: Dec 2018 Location: South West Missouri Posts: 17	How to hold a Merc 312 down? Hi All, I am in the middle of a Merc Montclair power train project. I am finishing off all the pumps and bolt-ons, before dropping it in. I thought I was covered by taking a lot of pictures before I dis-assembled the thing. I guess I missed on taking some pictures of the motor mounts. They are shaped close to the shape of a "C" and I am not sure if the open part of the "C" is pointed to the front of the car or towards the back. They will bolt up either way. Has someone got any advice that they could help me out with? Thank You.