The Ford Barn - View Single Post

Y-Blockhead · 01-18-2019, 11:22 AM

Sponsored Links (Register now to hide all advertisements)

I seem to remember Bratton's said to adjust to ⅝" same as Snyder's and Les Andrews. Then Bratton's went to 11/16".

NOW you'll see that Bratton's tool instructions has changed 13/16".https://www.brattons.com/clutch-fing...ment-tool.html I have this same tool and it measures .625" (⅝"). Go figure.

I set mine at ⅝" and my clutch works fine. The main thing is to ensure they are all the same height. Mine were not.

01-18-2019, 11:22 AM	#6
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 5,849	Re: Pressure Plate Sponsored Links (Register now to hide all advertisements) I seem to remember Bratton's said to adjust to ⅝" same as Snyder's and Les Andrews. Then Bratton's went to 11/16". NOW you'll see that Bratton's tool instructions has changed 13/16".https://www.brattons.com/clutch-fing...ment-tool.html I have this same tool and it measures .625" (⅝"). Go figure. I set mine at ⅝" and my clutch works fine. The main thing is to ensure they are all the same height. Mine were not. Last edited by Y-Blockhead; 01-18-2019 at 11:27 AM.