The Ford Barn - View Single Post

Richard Lorenz · 11-20-2018, 10:58 AM

The Moller diagram has the Main and Cap Jets joined directly together by a line that should be cut off close to the main jet. The main jet then needs to be shown with a fuel supply directly from the bowl.

The De Angelis drawing as shown on page B-3 of the Bigger book looks good except that it would be nicer if a line had been shown going directly from the bowl to the bottom of the main jet. There is room for this line to be drawn in by hand, probably with a red-ink pen so that it will show up.

11-20-2018, 10:58 AM	#4
Richard Lorenz Senior Member Join Date: May 2010 Posts: 447	Re: Zenith B Carburetor Diagram The Moller diagram has the Main and Cap Jets joined directly together by a line that should be cut off close to the main jet. The main jet then needs to be shown with a fuel supply directly from the bowl. The De Angelis drawing as shown on page B-3 of the Bigger book looks good except that it would be nicer if a line had been shown going directly from the bowl to the bottom of the main jet. There is room for this line to be drawn in by hand, probably with a red-ink pen so that it will show up.