The Ford Barn - View Single Post

MAG · 12-17-2018, 07:27 PM

File both faces flat about 1/16" up from the tip on the screwdriver. Make sure it fits the slot in the well and or jet to prevent damage. Flat tip screwdrivers have angled faces and they tend to cam the screwdriver out of the jet or well. I have screwdrivers that are only used for carburetor work.

12-17-2018, 07:27 PM	#3
MAG Senior Member Join Date: May 2010 Location: Austin, Texas Posts: 925	Re: Rebuilding Zenith Carburetor File both faces flat about 1/16" up from the tip on the screwdriver. Make sure it fits the slot in the well and or jet to prevent damage. Flat tip screwdrivers have angled faces and they tend to cam the screwdriver out of the jet or well. I have screwdrivers that are only used for carburetor work. __________________ I noticed the harder I work the luckier I get!