View Single Post
Old 10-31-2020, 09:06 PM   #9
jimvette59
Senior Member
 
jimvette59's Avatar
 
Join Date: Jun 2010
Location: Perry OH
Posts: 1,327
Default Re: Pinion Location in Banjo

Is the bearing and race setup all 33 , 34 and where does the thrust washer go on a 33,34 setup. Does the 33,34 setup go in a 35 banjo? I will look into Van Pelts catalog. I looked at 33,34 10 spline and 35,48 pinion setups and near as I can figure is the Thrust washer for a 33,34 setup is supposed to be behind the pinion gear and the first bearing. It looks like the gear itself is tight up against the first bearing. I think you need to take it apart and install the thrust washer first. JMHO

Last edited by jimvette59; 10-31-2020 at 09:29 PM.
jimvette59 is offline   Reply With Quote