The Ford Barn - View Single Post

DavidG · 05-20-2020, 11:53 AM

Michael,

Good point as I am not 100% just yet. I may have the SK drawing up north that would show the original placement and the number of pieces for both years, but I can't access that for the time being. If I don't have the right SK, finding it at the BFRC is high on my to do list once I get there. Alternatively, the engineering drawings of the welting pieces will have their lengths which would be enough to figure out the sequence of placement of the welting.

Recently I confirmed that the welting beneath the grille is continuous and not two pieces joining at the filler below the center of the grille between the tips of the two front fenders. It could be that that continuous piece ends at the tops of the fronts of the inner panels and two other long pieces run from that point rearward to the front of the running boards making a total of three pieces of welting for the front fenders and grille.

05-20-2020, 11:53 AM	#7
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: HELP with FENDER WELT on 34 Coupe Michael, Good point as I am not 100% just yet. I may have the SK drawing up north that would show the original placement and the number of pieces for both years, but I can't access that for the time being. If I don't have the right SK, finding it at the BFRC is high on my to do list once I get there. Alternatively, the engineering drawings of the welting pieces will have their lengths which would be enough to figure out the sequence of placement of the welting. Recently I confirmed that the welting beneath the grille is continuous and not two pieces joining at the filler below the center of the grille between the tips of the two front fenders. It could be that that continuous piece ends at the tops of the fronts of the inner panels and two other long pieces run from that point rearward to the front of the running boards making a total of three pieces of welting for the front fenders and grille.