11-08-2019, 06:57 PM
|
#10
|
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,105
|
Re: Oil pump replacement gears
Quote:
Originally Posted by Conaway2
I just pulled the original pump gears from the degreaser bath, cleaned them up and inspected them. They are clearly machined, as the marks are very visible on both ends of each gear. There is also hardly any wear on the gear teeth or shaft. I think I’ll replace bushings and gaskets and reassemble the pump with the original gears.
|
There you go!
|
|
|