View Single Post
Old 08-22-2018, 02:08 PM   #13
rich b
Senior Member
 
rich b's Avatar
 
Join Date: May 2010
Location: Minnesota
Posts: 1,076
Default Re: Axle seal and bearing on '51 Merc

Quote:
Originally Posted by Frank Miller View Post
Take a piece of wire and tie the bearing retainer to the axle first. If it falls off or gets put on backwards you'll be buying a new bearing.
Good advise on the retainer; I've come across a couple retainers with part of the top cut off so they could be cheated back in place.
rich b is offline   Reply With Quote