View Single Post
Old 10-23-2017, 01:43 PM   #15
Tom Endy
Senior Member
 
Tom Endy's Avatar
 
Join Date: May 2010
Location: Southern California
Posts: 2,440
Default Re: Knocking after installing new flywheel

A suggestion: Coat the flywheel mounting bolt heads with a liberal coating of chalk. Put the disk against the flywheel surface and rotate it back and forth to see if any chalk transfers onto the springs.

Excellent safety wire job. I have never been able to do that well.

Tom Endy
Tom Endy is online now   Reply With Quote