The Ford Barn - View Single Post - 69a Block Oil Gallery Crack. Centre bearing

Lawrie · 07-09-2020, 03:59 PM

Phil , have you worked out the comp ratio,
on the 276 eng I have on the stand with 66cc heads, 8.4 -1, cranking psi is around 165 -170.
Starts OK on 6v
Lawrie

07-09-2020, 03:59 PM	#23
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,221	Re: 69a Block Oil Gallery Crack. Centre bearing Phil , have you worked out the comp ratio, on the 276 eng I have on the stand with 66cc heads, 8.4 -1, cranking psi is around 165 -170. Starts OK on 6v Lawrie