The Ford Barn - View Single Post

VeryTangled · 01-12-2020, 01:01 PM

Hi Everyone, on my '35 and '36 the female square in the rear drain and fill plugs are not an exact fit for a 3/8 extension or ratchet. But that's the tool I use. I just try to be as gentle as possible.

Maybe a long handle 3/8 ratchet or a 1/2 to 3/8 adapter on your 1/2 inch ratchet or breaker bar? I can't believe I'm saying this but maybe a shot of slick-em-up would make it turn easier?

I might suggest you make sure the fill plug is free before you try to get the drain plug out.

01-12-2020, 01:01 PM	#8
VeryTangled Senior Member Join Date: May 2010 Location: (Not far enough...) Outside of DC Posts: 3,387	Re: 39 rear drain plug Hi Everyone, on my '35 and '36 the female square in the rear drain and fill plugs are not an exact fit for a 3/8 extension or ratchet. But that's the tool I use. I just try to be as gentle as possible. Maybe a long handle 3/8 ratchet or a 1/2 to 3/8 adapter on your 1/2 inch ratchet or breaker bar? I can't believe I'm saying this but maybe a shot of slick-em-up would make it turn easier? I might suggest you make sure the fill plug is free before you try to get the drain plug out. __________________ -Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum?