View Single Post
Old 12-12-2019, 06:29 AM   #19
Ian1932
Senior Member
 
Ian1932's Avatar
 
Join Date: Nov 2017
Location: Knoxville, TN
Posts: 317
Default Re: Master Cylinder Bracket

Genn & V8COOPMAN, I cut my bracket apart. I just tack welded it back together. I moved the face plate all the way up to where the hex of the MC bolt heads will just rest on the top plate where it mounts to bottom of the frame. This pushes the MC really close to the bottom of the K member. This should be ok right? I moved up about 1-3/8". Thanks for your help! Input is helping me greatly!
Attached Images
File Type: jpg 1.jpg (44.1 KB, 19 views)
File Type: jpg 2.jpg (44.0 KB, 19 views)
File Type: jpg 3.jpg (42.2 KB, 21 views)
File Type: jpg 4.jpg (50.0 KB, 20 views)
Ian1932 is offline   Reply With Quote