The Ford Barn - View Single Post

Tom Wesenberg · 09-23-2019, 06:10 PM

The other terminal is the one going to the generator output stud. Start the engine, then jump the 2 terminals together to see if you get output.

Disconnect the jumper before shutting down the engine.

09-23-2019, 06:10 PM	#13
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Generator hot to touch The other terminal is the one going to the generator output stud. Start the engine, then jump the 2 terminals together to see if you get output. Disconnect the jumper before shutting down the engine.