View Single Post
Old 07-28-2019, 04:18 PM   #2
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,320
Default Re: method for verifying fuel pump output volume

How about this. Disconnect the fuel line from the carb and direct it into a suitable recepticle (you may have to use a length of rubber hose). Crank the engine with the coil wire pulled for 15 seconds. Measure the amount of fuel pumped and multiply by 3. It should get you close.
tubman is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)