Quote:
Originally Posted by johndee138
BOY! this thread has sure veered off from what I originally posted the question for. Apparently the upshot of all this is, there isn't much available that will work with the original gauge, (what I had already determined) and you take your chances with the "replacement" units.
I picked up the adapter ring mentioned previously, and a universal fuel gauge and sender kit that will fit into it. Now I have to figure out where to hide the gauge.
Now back to the history lesson...........
|
Take a look at putting it in the right cowl panel. When in the driver's seat you can look over and see it. Did this on a couple of my old Fords. Easy to put a hole in the cardboard panel. You may have to run a ground wire for the gauge body.