The Ford Barn - View Single Post

Floats · 10-19-2019, 01:49 PM

Chad,
Fit the ball first, before you start tightening the large retaining screw on the end.
The springs were probably worn as you say, however, so are the balls. Otherwise you would not have replaced them, would you ?

10-19-2019, 01:49 PM	#3
Floats Senior Member Join Date: Dec 2013 Location: Mossel Bay, about 300km from Cape Town Posts: 530	Re: Help! Tie rod end install Chad, Fit the ball first, before you start tightening the large retaining screw on the end. The springs were probably worn as you say, however, so are the balls. Otherwise you would not have replaced them, would you ? __________________ Regards Chris Cape Town 28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC