View Single Post
Old 09-12-2020, 03:49 PM   #2
Dobie Gillis
Senior Member
 
Dobie Gillis's Avatar
 
Join Date: May 2012
Location: Middle TN
Posts: 1,060
Default Re: steering column install

According to the '54/'55 Mercury parts manual there should be a bearing and a tapered sleeve at the top of the shaft. No spacer or shim shown at the pedal bracket. Again, this is from a Mercury parts manual but your '55 Ford would use the same or similar parts.
__________________
Often wrong but never in doubt.
Dobie Gillis is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)