Thread: Maine Machine Shop to Replace wheel Bearing Races?
View Single Post
Old 03-29-2020, 07:59 AM   #19
Frank Miller
Senior Member
 
Frank Miller's Avatar
 
Join Date: May 2010
Location: Auburn, MA
Posts: 2,106
Default Re: Maine Machine Shop to Replace wheel Bearing Races?
Quote:
Originally Posted by Bored&Stroked View Post
If that is the wall thickness, then this is what you'll need to turn/grind the original down by.
Actually double the wall thickness. If the thickness is 0.125 you'll end up with a 0.250 smaller diameter.
__________________
“The technique of infamy is to start two lies at once and get people arguing heatedly over which is true.” ~ Ezra Pound
Frank Miller is offline   Reply With Quote