Quote:
Originally Posted by skidmarks
Roughly .135
You have to measure each one but thats a close enough estimate to give them a idea .
The mac version is like double that making the original pretty thin and sketchy.
Make sure there are no square edges, has to be radius to prevent a crack starter
Im building a 3.54 for a 41 ford pickup and when through 6 sets of housings and all of them had issues.
|
I can 'second' that measurement... Actually, the ones I have, measure about .125 wall thickness.
Mine came from C&G... Pretty sure that John Connley's come from the same place. I've had mine quite a while, probably since Clyde and Gayle were there. Mine are available, the car is long gone.