The Ford Barn - View Single Post

jimTN · 10-26-2019, 03:58 PM

I fixed mine by using channel iron. Made a c shaped structure with 4 or 5 in channel iron, bolted it to the frame on both sides extending back so that when a channel was welded across the back, I could bolt 34 car bumper brackets to it. All the channel is totally out of sight under the bed.

10-26-2019, 03:58 PM	#3
jimTN Senior Member Join Date: May 2010 Location: Powell, TN Posts: 2,509	Re: 1934 pickup rear bumper and brackets I fixed mine by using channel iron. Made a c shaped structure with 4 or 5 in channel iron, bolted it to the frame on both sides extending back so that when a channel was welded across the back, I could bolt 34 car bumper brackets to it. All the channel is totally out of sight under the bed.