Quote:
Originally Posted by mike657894
for the nut my sockets wouldnt get in there. i used wrench on the nut at 90 degree and put a large crecent wrench on the fist wrench. the first wrench biting the bolt and the second wrench biting the first wrench as close to pully as possible. IF my fuzzy memorys serve me today.
|
Also had the issue of getting a socket and ratchet handle or breaker bar in with out taking other things off. Found a deep enough socket, but could not get it on the nut with the handle or breaker attached, and not enough room to put the socket on and then put the ratchet handle or breaker on the socket. Got lucky and had a long handle box end wrench that fit. Clamped the wrench in a vice between 2 pieces of wood, and used a propane torch to bend the handle up like what is in the picture in this string.