The Ford Barn - View Single Post - Move Pinion forward and back per Les Andrews

Growley bear · 04-17-2018, 02:07 PM

I disassembled a differential a couple years ago and the pinion bearing was a combination of two carrier/pinion cones, two carrier cups with a stack of two rear axel bearing retainer rings between the two cups. The pattern was great, I don't know who or when but it is still going strong.
If it ain't broke_____________---.

04-17-2018, 02:07 PM	#35
Growley bear Senior Member Join Date: Apr 2012 Posts: 777	Re: Move Pinion forward and back per Les Andrews I disassembled a differential a couple years ago and the pinion bearing was a combination of two carrier/pinion cones, two carrier cups with a stack of two rear axel bearing retainer rings between the two cups. The pattern was great, I don't know who or when but it is still going strong. If it ain't broke_____________---.