The Ford Barn - View Single Post

4port · 04-15-2018, 05:07 AM

Enlarge the inside diameter of the shaft, by running a drill bit down it for a few inches. Find a bit that fits the shaft hole, then get a bit 1/64" larger in diameter and enlarge the hole. Then test the horn rod for binding.

04-15-2018, 05:07 AM	#8
4port Senior Member Join Date: May 2010 Location: Dallas TX Posts: 112	Re: Horn Rod Lube? Enlarge the inside diameter of the shaft, by running a drill bit down it for a few inches. Find a bit that fits the shaft hole, then get a bit 1/64" larger in diameter and enlarge the hole. Then test the horn rod for binding.