Quote:
Originally Posted by BRENT in 10-uh-C
Actually, in the PDF that I uploaded, it shows the measurement is taken from the lower portion of the hole. In my calculations, I show where that hole in the track is supposed to be 0.260", and so I factored in ½ of the hole's diameter and added to his specification. Then I compared Les' number to the Ford specification which is where I got the 0.055" discrepancy.
|
The 1-5/16" dimension in Les book is to the shoulder of the stud, which I believe is 3/8" diameter. 1.499 minus half of 3/8 (3/16 or .1875") is 1.3115", which is .001" less than 1-5/16".