Thread: Coil question
View Single Post
Old 06-30-2019, 01:36 AM   #5
Tinker
Senior Member
 
Tinker's Avatar
 
Join Date: May 2010
Location: MN
Posts: 7,053
Default Re: Coil question

It'll probably work okay, if its a good coil and If the resistance is correct. Early yblocks (54-62ish/6v voltage reducer inline to the coil) used 6v can coils and can be bought from local parts stores. Internal resistance is higher.


lot of maybes though... and the best thing about being wrong is you learn something.

Last edited by Tinker; 06-30-2019 at 01:44 AM.
Tinker is offline   Reply With Quote