The Ford Barn - View Single Post

Mart · 02-25-2020, 07:44 PM

The distributor will only correctly engage with the cam at one spacing. Both setups should give you this spacing.

The ideal scenario would be to swap the cam and go direct two bolt and no spacer.

02-25-2020, 07:44 PM	#18
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,755	Re: 2 bolt crab on a 21 stud question The distributor will only correctly engage with the cam at one spacing. Both setups should give you this spacing. The ideal scenario would be to swap the cam and go direct two bolt and no spacer.